1
Construct Side Slant Pockets
Stitch pocket bags to front and back leg pocket openings right sides together. Understitch, fold pocket bags together, and stitch pocket perimeter.
Paco 裾リブ付きトラックパンツ – 型紙一覧
Paco 裾リブ付きトラックパンツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size corresponding to natural waist and full hip/seat measurements. If between sizes, choose the larger size and adjust side seams.
ゆとりについて
Structured trousers include +4 to +6 cm ease at waistband and +8 to +12 cm ease through hip/thigh for sitting comfort.
生地と用具
Cotton twill, chino, denim, linen, or wool suiting · None (0% stable woven)
- Cotton twill, chino, denim, linen, or wool suiting
- Pocketing cotton for pocket bags
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.8 | 1.95 | 1.4 | 1.55 |
| L – XL | 2.1 | 2.3 | 1.7 | 1.85 |
| 2XL – 3XL | 2.5 | 2.75 | 2 | 2.2 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- 7 inch metal or nylon trouser zipper
- Trouser hook and eye or 18mm button
- Interfacing for waistband
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
15 mm (5/8 in) included on outseams, inseams, and crotch curve.
35 mm (1 3/8 in) hem allowance.
N/A (Jogger trouser garment).
- Front Jogger Leg: Cut 1 Pair (1 Left, 1 Right) Transfer pocket slant markings and knee alignment marks
- Back Jogger Leg: Cut 1 Pair (1 Left, 1 Right) Transfer crotch curve notches and knee alignment marks
- Side Slant Pocket Bag: Cut 2 Pairs in Lining/Pocketing Understitch opening to prevent lining reveal
- Rib Ankle Cuff: Cut 2 in Heavy Rib Knit Fold crosswise and stretch evenly to fit ankle hem
- Elastic Waistband: Cut 1 on Fold in Main Fabric Fold lengthwise to enclose 40mm wide elastic and drawstring
Press knit or woven fabric before cutting to remove packing folds.
Align piece grainlines strictly parallel to fabric selvages.
Cut rib knit cuffs with ribs running vertically for maximum stretch.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Join Side Seams & Inseams
Pin front and back legs right sides together at outseams and inseams. Stitch continuously from waist to ankle hem and press seams open or serge.
3
Sew Continuous Crotch Seam
Turn one jogger leg right side out and slip inside the other leg right sides together. Stitch crotch seam securely from front to back waist, reinforcing curve with a second pass.
4
Attach Elastic Waistband Casing
Stitch short ends of waistband together. Fold in half lengthwise and attach to waistline, leaving a 5 cm opening. Thread 40mm elastic and drawstring, secure ends, and edge-stitch closed.
5
Attach Rib Ankle Cuffs
Stitch rib cuff short ends right sides together to form rings. Fold in half wrong sides together. Pin to jogger leg openings matching quarter points, stretch rib evenly, and serge in the round.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (paco-cuffed-track-pants). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification