1
Construct Side Slant Pockets
Stitch pocket bags to front and back leg side seams right sides together at slant markings. Understitch and stitch pocket bag perimeters.
Tibbie プルオンショートパンツ – 型紙一覧
Tibbie プルオンショートパンツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size corresponding to natural waist and full hip/seat measurements. If between sizes, choose the larger size and adjust side seams.
ゆとりについて
Structured trousers include +4 to +6 cm ease at waistband and +8 to +12 cm ease through hip/thigh for sitting comfort.
生地と用具
Cotton twill, chino, denim, linen, or wool suiting · None (0% stable woven)
- Cotton twill, chino, denim, linen, or wool suiting
- Pocketing cotton for pocket bags
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.1 | 1.2 | 0.9 | 1 |
| L – XL | 1.3 | 1.4 | 1.1 | 1.2 |
| 2XL – 3XL | 1.5 | 1.65 | 1.3 | 1.4 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- 7 inch metal or nylon trouser zipper
- Trouser hook and eye or 18mm button
- Interfacing for waistband
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
15 mm (5/8 in) included on outseams, inseams, and crotch curve.
20 mm (3/4 in) hem.
N/A (Shorts garment).
- Shorts Front Leg: Cut 1 Pair (1 Left, 1 Right) Transfer pocket slant markings and waist notches
- Shorts Back Leg: Cut 1 Pair (1 Left, 1 Right) Transfer crotch curve notches
- Elastic Waistband Casing: Cut 1 on Fold in Main Fabric Sized for 35mm wide elastic and drawstring insert
- Side Slant Pocket: Cut 2 Pairs in Lining or Self Fabric Fold and stitch pocket pouch perimeter
Press fabric before cutting to remove packing folds.
Align piece grainlines strictly parallel to fabric selvages.
Transfer pocket notches with small snips into seam allowance.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Stitch Inseams and Outseams
Pin front and back legs right sides together. Stitch outseams around pocket bags down to hem. Stitch inseams from crotch point down to hem and press seams open.
3
Sew Continuous Crotch Curve
Turn one shorts leg right side out and slip inside other leg right sides together. Stitch crotch seam securely from front waist to back waist.
4
Attach Waistband Casing & Insert Elastic
Fold waistband casing in half lengthwise. Stitch to waistline leaving a 5 cm opening. Thread elastic and drawstring, secure ends, and stitch opening closed.
5
Hem Shorts Legs
Turn up specified 20 mm double-fold hem along each shorts leg. Press crisp and topstitch in place.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (tibbie-drawstring-shorts). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification