1
Staystitch & Gather Bodice
Sew two rows of basting stitches along front neck gather zone. Pull threads to match facing width.
スクエアネックのブラウス – 型紙一覧
スクエアネックのブラウスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on high bust and shoulder width. The gathers over the bust accommodate A through D cup sizes easily.
ゆとりについて
Comfortable positive ease of +12 cm (+4.7") at bust with romantic gathered shaping across the front.
生地と用具
Lightweight woven fabrics with body and drape · None (0% stretch - stable woven)
- Cotton lawn or cotton batiste for light, airy volume
- Gingham or floral cotton poplin for classic vintage charm
- Crinkle cotton gauze or Swiss dot for delicate texture
- Lightweight linen (120–140 gsm) for natural structure
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.9 | 2.1 | 1.5 | 1.6 |
| L – XL | 2.2 | 2.4 | 1.7 | 1.9 |
| 2XL – 3XL | 2.5 | 2.7 | 2 | 2.2 |
Notions
- 6 mm (1/4 in) braided elastic for sleeve cuffs (1 m / 1.1 yd)
- All-purpose thread
- Fusible lightweight interfacing (0.4 m)
Tools
- Sewing machine
- Safety pin or bodkin for elastic
- Iron & pressing board
裁断と型紙パーツ
1.5 cm (5/8 in) included.
1.5 cm (5/8 in) double-fold hem.
1.0 cm (3/8 in) for square neckline facing.
- Front Bodice with Gathers: Cut 1 on fold
- Back Bodice: Cut 1 on fold
- Front Square Neck Facing: Cut 1 on fold + interfacing
- Back Square Neck Facing: Cut 1 on fold + interfacing
- Puff Sleeve: Cut 1 pair
Transfer all corner drill marks and sleeve gather notches carefully.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Construct Square Neck Facing
Join front square neck facing to back square neck facing at shoulder seams. Stitch facing to bodice square neckline right sides together, pivoting sharply at corners with needle down. Clip precisely to corner stitches. Understitch facing and press seam allowances toward facing.
3
Assemble Puff Sleeves
Gather sleeve head. Gather lower sleeve hem edge and form casing for elastic. Insert elastic and secure.
4
Set In Sleeves & Close Sides
Set sleeves into armholes right sides together. Stitch side seams and underarms, and press seam allowances open. Hem bottom edge.
困ったときは
Puckering at square neckline corners
Not clipped close enough to the stitch line.
Clip diagonally right to the needle pivot point (leave 1 mm).
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio