1
Sew Bust Darts
Fold and pin bust darts matching legs. Stitch from side seam toward apex point. Press darts downward over tailor ham.
クラシックなノースリーブトップス – 型紙一覧
クラシックなノースリーブトップスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on high bust measurement. Bust darts provide tailored contouring without clinging.
ゆとりについて
Tailored ease of +6 cm (+2.4") at bust. Designed to skim neatly under suiting jackets.
生地と用具
Structured light to midweight wovens · None (0% stretch - stable woven)
- Cotton sateen or crisp broadcloth for smooth workwear polish
- Linen-cotton blend (145 gsm) for breathable elegance
- Silk or polyester crepe for tailored drape
- Lightweight wool suiting crepe for office capsule wardrobes
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.2 | 1.3 | 0.9 | 1 |
| L – XL | 1.4 | 1.5 | 1.1 | 1.2 |
| 2XL – 3XL | 1.7 | 1.9 | 1.3 | 1.4 |
Notions
- One small shank or shirt button (10–12 mm)
- All-purpose thread
- Fusible stay tape for keyhole (0.2 m)
Tools
- Sewing machine
- Tailor ham for pressing bust darts
- Fine shears
裁断と型紙パーツ
1.5 cm (5/8 in) on side and shoulder seams.
2.0 cm (3/4 in) blind or edgestitched hem.
1.0 cm (3/8 in) for all-in-one facing.
- Front Bodice with Bust Darts: Cut 1 on fold
- Back Bodice with Keyhole Slit: Cut 1 pair
- All-in-One Facings: Cut 1 set
Mark bust dart apex points accurately using tailor chalk.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Construct Back Keyhole
Attach thread loop or rouleau loop to left keyhole edge. Stitch center back seam up to keyhole mark.
3
Shoulder Seams & All-in-One Facing Attachment
Join front and back bodice right sides together at shoulder seams. Stitch facing to neckline and armholes right sides together using the burrito method. Turn right side out and press seam allowances.
4
Side Seams & Hem
Align front and back bodice right sides together. Stitch continuous side seams from underarm to hem. Press seam allowances open. Hem bottom edge and attach button.
困ったときは
Dart tip pouts or creates a point
Backstitched at apex.
Tie off dart thread tails by hand at the tip instead of backstitching.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm