Shoulder Seams
Align Front Tank Bodice and Racerback Tank Bodice right sides together. Stitch narrow racerback shoulder seams together with stretch stitch. Press seam allowances toward back.
レーサーバックタンクトップの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ(50.8 mm)の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
デザイン上のゆとりを含めた、完成した衣服の寸法です。
Incorporate negative ease for a supportive sports fit. If between sizes, size up for comfort.
Negative ease of -4 cm (-1.6") to ensure tank stays in place during high-motion workouts.
Athletic performance knits with 4-way stretch · 50% 4-way stretch with 90%+ recovery
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.2 | 1.3 | 0.9 | 1 |
| L – XL | 1.4 | 1.5 | 1.1 | 1.2 |
| 2XL – 3XL | 1.6 | 1.8 | 1.3 | 1.4 |
0.8 cm (5/16 in) serger allowance.
1.5 cm (5/8 in) stretch hem.
0.6 cm (1/4 in) for binding.
Cut binding strips across maximum stretch.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Align Front Tank Bodice and Racerback Tank Bodice right sides together. Stitch narrow racerback shoulder seams together with stretch stitch. Press seam allowances toward back.
Attach stretch binding to scooped front and back neckline. Turn to wrong side and topstitch with twin needle.
Attach stretch binding to both armhole curves, gently tensioning around curves. Stitch and trim.
Align front and back bodices right sides together. Stitch continuous side seams with serger and press seam allowances. Turn up hem and topstitch with stretch stitch.
Binding wasn't stretched enough while sewing.
Stretch binding 10–15% around curved armhole sections while keeping bodice relaxed.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio