1
Construct Split Neck Facing
Apply facing to front tunic split right sides together. Stitch around V-point, clip to apex, turn to inside, and press seam allowances.
スタンドカラーのチュニック – 型紙一覧
スタンドカラーのチュニックの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Tunic length extends to mid-thigh. Check both bust and hip measurements to ensure sufficient ease over hips.
ゆとりについて
Comfortable ease of +14 cm (+5.5") at bust and +16 cm (+6.3") over hips with side slit freedom.
生地と用具
Lightweight to midweight breathable wovens · None (0% stretch - stable woven)
- Pure European Linen (140–160 gsm) for organic luxury
- Cotton ikat, khadi, or handwoven cottons for artisanal character
- Tencel modal twill for liquid softness and drape
- Crisp cotton poplin for clean architectural lines
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2 | 2.2 | 1.5 | 1.6 |
| L – XL | 2.3 | 2.5 | 1.7 | 1.9 |
| 2XL – 3XL | 2.6 | 2.8 | 2 | 2.2 |
Notions
- 2 buttons for sleeve tabs (12 mm)
- Fusible interfacing (0.3 m) for collar
- Matching thread
Tools
- Sewing machine
- Rotary cutter
- Pressing iron
裁断と型紙パーツ
1.5 cm (5/8 in) included.
1.5 cm (5/8 in) double-fold hem.
1.0 cm (3/8 in) on collar stand.
- Front Tunic with Split: Cut 1 on fold
- Back Tunic on Fold: Cut 1 on fold
- Mandarin Collar Stand: Cut 2 (1 interfaced)
- 3/4 Sleeve: Cut 1 pair
- Sleeve Tabs: Cut 2
Interface collar pieces.
Mark split neckline depth precisely.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shoulder Seams & Mandarin Collar
Align front tunic and Back Tunic on Fold right sides together at shoulder seams. Stitch shoulder seams and press seam allowances open. Assemble curved mandarin stand collar, stitch outer collar to neckline right sides together, and enclose raw edges.
3
Sleeves and Roll Tabs
Sew button tabs. Insert sleeves flat into armholes right sides together. Stitch sleeve and side seams right sides together down to side slit marks, and press seam allowances.
4
Finish Side Vents & Hem
Turn under and topstitch side vents. Sew double fold hem along bottom edge, and press seam allowances.
困ったときは
Mandarin collar stands unevenly
Not clipped around back neck curve.
Clip seam allowance along neckline curve so collar relaxes against neck.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm