本文へ移動
Threadline Patterns
日本語

普段着のラグランパーカー – 型紙一覧

普段着のラグランパーカーの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。

サイズ
XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
難易度
中級者向け
バージョン
1.0.0-published
更新日
2026-03-01
公開状況
公開済み

前後の製図

前面
背面

PDFファイルのダウンロード

「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ(50.8 mm)の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。

印刷確認用シートをダウンロード

寸法表

寸法の単位

すべての表でセンチメートルとインチを切り替えます

1. 身体寸法表

身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。

横にスクロール
サイズ バスト ウエスト ヒップ
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 94 cm 76 cm 102 cm
L 102 cm 84 cm 110 cm
XL 112 cm 94 cm 120 cm
2XL 122 cm 104 cm 130 cm
3XL 132 cm 116 cm 142 cm

2. 仕上がり寸法表

デザイン上のゆとりを含めた、完成した衣服の寸法です。

横にスクロール
サイズ 仕上がりバスト 仕上がり丈 裾周り
XS 104 cm 66 cm 86 cm
S 110 cm 67.5 cm 92 cm
M 118 cm 69 cm 100 cm
L 126 cm 70.5 cm 108 cm
XL 136 cm 72 cm 118 cm
2XL 146 cm 73.5 cm 128 cm
3XL 156 cm 75 cm 138 cm

サイズ選択について

Generously cut with 24 cm (9.4") of ease for wearing over tees. Select your standard size for comfortable layering.

ゆとりについて

Generous layering ease of +24 cm (+9.4") at chest with deep comfortable raglan armholes.

生地と用具

Heavyweight fleece or French terry · 20–30% stretch in main body; 50%+ in ribbing

  • Cotton-poly fleece (300–380 gsm) for authentic streetwear volume
  • Heavyweight loopback cotton terry
  • Matching 2x2 tubular ribbing for trims
  • Cotton jersey for hood lining
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M2.22.41.82
L – XL2.52.722.2
2XL – 3XL2.83.12.32.5

Notions

  • Cotton flat braided drawstring (1.3 m / 1.5 yd)
  • 2 metal eyelets/grommets (8 mm) or buttonhole thread
  • Matching rib knit (0.5 m)

Tools

  • Sewing machine or serger
  • Eyelet tool or buttonhole foot
  • Bodkin

裁断と型紙パーツ

1.0 cm (3/8 in) serger seam.

Attached 6 cm rib waistband.

1.0 cm (3/8 in) for hood attachment.

  • Front Bodice: Cut 1 on fold
  • Back Bodice: Cut 1 on fold
  • Raglan Sleeve: Cut 1 pair
  • Kangaroo Pocket: Cut 1
  • Hood Outer & Lining: Cut 2 pairs each
  • Rib Wrist Cuffs: Cut 1 Pair in Rib Knit
  • Rib Hem Waistband: Cut 1 on Fold in Rib Knit

Interface eyelet spots on hood outer before cutting.

Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.

Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.

縫製手順

1

Construct Kangaroo Pocket

Turn under and stitch pocket diagonal openings with twin needle. Press top, sides, and bottom under 1 cm. Stitch onto front bodice.

2

Raglan Seams & Body Assembly

Stitch raglan sleeve seams joining front and back bodices. Stitch continuous underarm and side seams.

3

Assemble Lined Hood

Stitch eyelets in hood outer. Assemble hood outer and lining, stitch front edge right sides together, understitch, and insert drawstring.

4

Attach Hood & Rib Trims

Cross front hood points 2 cm at center front, pin to neckline, and stitch. Attach wrist rib cuffs and bottom waistband.

困ったときは

Kangaroo pocket corners tear under stress

Strain points not reinforced.

Sew small reinforcement triangles or bartacks at top pocket corners.

出典とライセンス

Drafted by Threadline Patterns. CC BY-SA 4.0 International.

CC BY-SA 4.0

検証について

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Threadline Pattern Studio

英語の原文ページお問い合わせ

関連する型紙