1
Finish Boatneck Edge
Apply Neckline Facing Strips to Front Bodice on Fold and Back Bodice on Fold neckline edges right sides together. Turn under and topstitch with twin needle. Press seam allowances flat.
ボートネックのブルトントップス – 型紙一覧
ボートネックのブルトントップスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Provides 8 cm (3.1") of comfortable positive ease. If sewing with stripes, match stripes at underarm notches.
ゆとりについて
Nautical straight cut with +8 cm (+3.1") bust ease and side vents.
生地と用具
Midweight stable cotton jersey or interlock · 25–35% crosswise stretch with stable recovery
- Yarn-dyed striped cotton jersey (210–250 gsm)
- French sailor cotton interlock knit for authentic structured hand
- Organic cotton jersey with gentle stretch
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.6 | 1.8 | 1.3 | 1.4 |
| L – XL | 1.9 | 2.1 | 1.5 | 1.6 |
| 2XL – 3XL | 2.2 | 2.4 | 1.7 | 1.9 |
Notions
- Ballpoint sewing needle (size 80/12)
- Matching thread
- Clear elastic for shoulder seam reinforcement
Tools
- Sewing machine with walking foot or serger
- Wonder clips to match stripe lines
裁断と型紙パーツ
1.0 cm (3/8 in) included.
2.5 cm (1 in) hem allowance.
1.0 cm (3/8 in) turned-down facing.
- Front Bodice on Fold: Cut 1 on fold
- Back Bodice on Fold: Cut 1 on fold
- 3/4 Sleeve: Cut 1 pair
- Neckline Facing Strips: Cut 2
Carefully pin stripes at selvages so horizontal stripes match across side seams.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shoulder Seams
Align Front Bodice on Fold and Back Bodice on Fold right sides together. Stitch short shoulder seams with clear elastic reinforcement. Press seam allowances open.
3
Insert 3/4 Sleeves Flat
Insert 3/4 sleeves flat into armholes right sides together, matching stripes at sleeve cap notches. Stitch with stretch stitch.
4
Side Seams with Vents & Hem
Align front and back bodices right sides together. Stitch side seams stopping 6 cm above hem for side vents. Press seam allowances. Twin needle hem sleeves, side vents, and bottom edge.
困ったときは
Stripes do not align across side seams
Fabric shifted while feeding.
Use walking foot and place fabric clips every 3 cm along stripes before sewing.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
Shares the same finished body-block chest, length and hem values as pat-016 by design; neckline, sleeve, facing and CAD paths are distinct.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm