Stitch Tier Side Seams
Stitch side seams for each of the three tiers (Top, Middle, and Bottom Ruffle) right sides together to create three closed fabric loops. Finish seam allowances.
Lange rok met stroken: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on natural waist and fullest hip measurement.
+15 to +25 cm hip ease provided by tiered gathers for effortless movement.
Lightweight to medium-weight woven: cotton voile, rayon challis, linen, or chambray · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 3.2 | 3.5 | 2.6 | 2.85 |
| L – XL | 3.7 | 4.05 | 3 | 3.3 |
| 2XL – 3XL | 4.2 | 4.6 | 3.5 | 3.85 |
10 mm (3/8 in) included on all seams.
30 mm (1 1/4 in) tailored hem.
N/A (Skirt garment).
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Stitch side seams for each of the three tiers (Top, Middle, and Bottom Ruffle) right sides together to create three closed fabric loops. Finish seam allowances.
Run two parallel gathering threads along upper edge of Middle Tier. Divide Middle and Top tiers into quarters, pull gathering threads to match, pin right sides together, and stitch. Finish seam and press upward.
Run gathering threads along upper edge of Bottom Ruffle. Quarter-mark both tiers, distribute gathers evenly, and stitch right sides together. Finish and press seam upward.
Join waistband casing ends into a ring, leaving a 40 mm opening on inside. Fold lengthwise wrong sides together and press. Pin waistband to upper edge of Top Tier right sides together and stitch.
Thread 40 mm elastic through waistband casing opening, overlap ends by 15 mm, and zig-zag securely. Close opening. Turn a narrow 6 mm double-fold hem along bottom ruffle and edgestitch.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (tiered-ruffle-maxi-skirt). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jurken en rokken · Gevorderde beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies