Naar de inhoud
Threadline Patterns
Nederlands

Sandy cirkelrok – Naaipatronen

Sandy cirkelrok: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.0 KB)Downloaden: A4 (PDF · 232.6 KB)Downloaden: US Letter (PDF · 244.7 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Taille Heup
XS 62 cm 88 cm
S 68 cm 94 cm
M 74 cm 100 cm
L 80 cm 106 cm
XL 90 cm 116 cm
2XL 100 cm 126 cm
3XL 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte taille Afgewerkte heup Afgewerkte lengte Zoomwijdte
XS 67 cm 125 cm 65 cm 380 cm
S 75 cm 133 cm 66 cm 395 cm
M 83 cm 141 cm 66 cm 410 cm
L 91 cm 149 cm 67 cm 425 cm
XL 101 cm 159 cm 67 cm 440 cm
2XL 111 cm 169 cm 68 cm 455 cm
3XL 121 cm 179 cm 68 cm 470 cm

Maatkeuze en pasvorm

Select size based on natural waist and fullest hip measurement.

Toelichting op bewegingsruimte

Zero ease required through skirt drape; waistband features +2 cm wearing ease.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M3.23.52.22.4
L – XL3.63.952.52.75
2XL – 3XL44.352.83.05

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • 7 inch invisible zipper
  • Hook and eye closure
  • Fusible waistband interfacing

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

6 mm (1/4 in) baby rolled hem.

N/A (Skirt garment).

  • Full Circle Skirt Panels: Cut 2 Half-Circles Allows fluid 360° drape
  • Contoured Waistband: Cut 2 in Fabric, Cut 1 in Fusible Interfacing 10 mm seam allowance

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Staystitch Waist Curve

Immediately staystitch circular waist opening at 8 mm to prevent bias stretching while handling.

2

Stitch Side Seams & Insert Zipper

Stitch left side seam right sides together and press seam allowances open. On right side seam, install invisible zipper down to hip notch and stitch remaining seam to hem.

3

Attach Interfaced Waistband

Apply interfacing to waistband. Attach outer waistband to skirt waistline right sides together. Turn inner waistband under and stitch in the ditch.

4

Hang Skirt Before Hemming

Hang skirt on a hanger for 24 hours to allow circular bias fibers to drop and settle naturally.

5

Level and Hem

Measure hem from floor evenly all around. Trim excess and sew a narrow 6 mm baby rolled hem.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (sandy-full-circle-skirt). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen