1
Stitch Tier Side Seams
Stitch side seams for each of the three tiers (Top, Middle, and Bottom Ruffle) right sides together to create three closed fabric loops. Finish seam allowances.
ティアードマキシスカート – 型紙一覧
ティアードマキシスカートの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on natural waist and fullest hip measurement.
ゆとりについて
+15 to +25 cm hip ease provided by tiered gathers for effortless movement.
生地と用具
Lightweight to medium-weight woven: cotton voile, rayon challis, linen, or chambray · None (0% stable woven)
- Rayon challis or viscose lawn (110–140 gsm)
- Cotton voile or double gauze
- Lightweight washed linen
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 3.2 | 3.5 | 2.6 | 2.85 |
| L – XL | 3.7 | 4.05 | 3 | 3.3 |
| 2XL – 3XL | 4.2 | 4.6 | 3.5 | 3.85 |
Notions
- Matching all-purpose sewing thread
- Universal sewing needle (size 70/10 or 80/12)
- 40 mm (1.5 in) non-roll elastic for waist casing
- Safety pin or bodkin for threading elastic
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
30 mm (1 1/4 in) tailored hem.
N/A (Skirt garment).
- Top Skirt Tier: Cut 2 in Fabric (1 Front, 1 Back) Upper tier beneath waistband
- Middle Skirt Tier: Cut 2 in Fabric (1 Front, 1 Back) Gathered middle tier (1.4:1 ratio)
- Bottom Ruffle Tier: Cut 2 in Fabric (1 Front, 1 Back) Gathered lower flounce (1.5:1 ratio)
- Elastic Waistband Casing: Cut 1 on Fold in Fabric Encloses 40 mm waistband elastic
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Gather Middle Tier to Top Tier
Run two parallel gathering threads along upper edge of Middle Tier. Divide Middle and Top tiers into quarters, pull gathering threads to match, pin right sides together, and stitch. Finish seam and press upward.
3
Gather Bottom Ruffle to Middle Tier
Run gathering threads along upper edge of Bottom Ruffle. Quarter-mark both tiers, distribute gathers evenly, and stitch right sides together. Finish and press seam upward.
4
Assemble Elastic Waistband
Join waistband casing ends into a ring, leaving a 40 mm opening on inside. Fold lengthwise wrong sides together and press. Pin waistband to upper edge of Top Tier right sides together and stitch.
5
Insert Elastic and Hem Ruffle
Thread 40 mm elastic through waistband casing opening, overlap ends by 15 mm, and zig-zag securely. Close opening. Turn a narrow 6 mm double-fold hem along bottom ruffle and edgestitch.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (tiered-ruffle-maxi-skirt). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification