Cutting and Preparation
Cut bodice front, bodice back, flared skirt panels, short sleeves, and waist tie strips. Press seam allowances.
Losse jurk met stroken: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on high bust and full bust measurement.
+6 to +10 cm bust ease; skirt panel flares generously over hips.
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 3.6 | 3.95 | 2.9 | 3.15 |
| L – XL | 4.1 | 4.5 | 3.4 | 3.7 |
| 2XL – 3XL | 4.7 | 5.15 | 3.9 | 4.25 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut bodice front, bodice back, flared skirt panels, short sleeves, and waist tie strips. Press seam allowances.
Join bodice shoulder seams and finish neckline edges with narrow hem or bias binding. Press seam allowances.
Set short sleeves into armholes with right sides facing, easing sleeve cap fullness into armscye. Press seam allowances.
Sew side seams from sleeve hem through bodice. Assemble skirt panels and gather waist edge to fit bodice. Press seam allowances.
Attach gathered skirt to bodice waistline, insert waist tie belt at side seam, and hem skirt sweep. Press seam allowances.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (tiered-cottagecore-smock-dress). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jurken en rokken · Gevorderde beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies