Preparation and Cutting
Cut sundress body panels on fold and self-fabric shoulder tie straps/sash.
Zomerjurk met gesmokt lijfje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on high bust and full bust measurement.
+6 to +10 cm bust ease; skirt panel flares generously over hips.
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.5 | 2.75 | 2 | 2.2 |
| L – XL | 2.9 | 3.15 | 2.4 | 2.6 |
| 2XL – 3XL | 3.3 | 3.6 | 2.8 | 3.05 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut sundress body panels on fold and self-fabric shoulder tie straps/sash.
Wind bobbin with elastic thread and sew parallel rows of shirring across bodice area until gathered to fit.
Sew side seams with right sides facing, taking care to secure shirring thread tails.
Fold shoulder tie straps lengthwise, stitch, turn right side out, and attach to upper bodice corners.
Turn and press double-fold hem along bottom skirt edge and steam to set shirring gathers.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (smocked-bodice-sundress). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jurken en rokken · Gevorderde beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies