Naar de inhoud
Threadline Patterns
Nederlands

Tuniek met ingeknipte hals – Naaipatronen

Tuniek met ingeknipte hals: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gevorderde beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 15.3 KB)Downloaden: A4 (PDF · 168.8 KB)Downloaden: US Letter (PDF · 169.0 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 96 cm 80 cm 108 cm 30 cm
S 102 cm 82 cm 114 cm 31.5 cm
M 108 cm 84 cm 120 cm 33 cm
L 114 cm 86 cm 126 cm 35 cm
XL 124 cm 88 cm 136 cm 38 cm
2XL 134 cm 90 cm 146 cm 41 cm
3XL 144 cm 92 cm 156 cm 44 cm

Maatkeuze en pasvorm

Select size corresponding to full chest/bust measurement. Compare bicep circumference for comfortable sleeve fit.

Toelichting op bewegingsruimte

Tailored shirts incorporate +10 to +14 cm chest ease for relaxed everyday movement and layering.

Stof en benodigdheden

Cotton poplin, Oxford cloth, linen, or chambray · None (0% stable woven)

  • Cotton poplin, Oxford cloth, linen, or chambray
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M2.22.41.81.95
L – XL2.52.752.12.3
2XL – 3XL2.93.152.42.6

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • 10 to 12 mm shirt buttons (8 to 10 count)
  • Lightweight fusible interfacing for collar and cuffs

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

10 mm (3/8 in) for collar stand seam.

  • Front Tunic with Notch Placket: Cut 1 on Fold in Fabric Notch neckline
  • Back Tunic on Fold: Cut 1 on Fold in Fabric Center back fold
  • Back Yoke: Cut 2 in Fabric (1 Outer, 1 Lining) Shoulder yoke
  • Tunic Sleeve: Cut 1 Pair in Fabric Roll-tab sleeve
  • Mandarin Stand Collar: Cut 2 in Fabric (1 Interfaced) Stand collar
  • Sleeve Cuffs: Cut 2 in Self Fabric, 2 in Interfacing Button cuffs
  • Sleeve Roll Tabs: Cut 2 in Self Fabric Roll tabs

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Construct Sleeve Tabs & Front Placket

Stitch sleeve roll tabs right sides together, turn, press, and topstitch. Apply lightweight interfacing to front neckline notch, stitch placket facing around notch, slash, turn inside, and press crisp.

2

Assemble Back Yoke

Sandwich the back tunic body between inner and outer back yokes using the burrito method. Topstitch along yoke seam.

3

Shoulder Seams and Mandarin Stand Collar

Attach front shoulders to back yoke assembly. Interface outer collar stand. Assemble collar stand pieces, turn, and stitch to neckline right sides together, sandwiching neck raw edges.

4

Set Sleeves Flat & Stitch Side Seams

Pin sleeves to armholes matching notches and stitch flat. Stitch side seams from sleeve hem down to tunic hem, leaving 10 cm open at bottom for side vents.

5

Finish Hem, Vents & Sleeve Buttons

Turn and topstitch side hem vents and curved tunic hem. Hem sleeve openings with cuff bands, sew button on outside of sleeve, and secure roll tab.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Threadline Open Design Studio (popover-notch-neck-tunic). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen