1
Stitch Waist Darts
Fold front and back waist darts right sides together. Stitch from waistline tapering to zero at dart points. Press darts towards center.
Penelope タイトスカート – 型紙一覧
Penelope タイトスカートの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on natural waist and fullest hip measurement.
ゆとりについて
+3 cm ease at waist, +6 cm ease at hip for pencil mobility.
生地と用具
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
- Lightweight to medium-weight suitable fabric substrates
- Pre-washed natural fibers (cotton, linen, or bamboo)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.1 | 1.2 | 0.9 | 1 |
| L – XL | 1.3 | 1.4 | 1.1 | 1.2 |
| 2XL – 3XL | 1.5 | 1.65 | 1.3 | 1.4 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- 7 inch invisible zipper
- Hook and eye closure
- Fusible waistband interfacing
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
30 mm (1 1/4 in) tailored hem.
N/A (Skirt garment).
- Front Skirt Panel: Cut 1 on Fold Transfer waist dart markings
- Back Skirt Panels: Cut 1 Pair (Left & Right) Center back zipper seam and kick pleat / vent
- Waistband Facing: Cut 2 in Fabric, Cut 1 in Interfacing Clean-finish contoured waist facing
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Insert Center Back Zipper
Finish center back raw edges. Install invisible zipper from waist down to back vent notch.
3
Construct Back Kick Pleat / Vent
Fold back vent extension right sides together, stitch across top of vent, press vent under, and topstitch diagonally at 45 degrees across vent stress point.
4
Stitch Side Seams
Pin front to back skirt right sides together along side seams. Stitch, finish edges, and press seams open.
5
Attach Waist Facing & Hem
Interface waist facing, stitch to upper skirt edge, understitch facing, turn inside. Press up 30 mm hem allowance and blind-stitch neatly.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (penelope-pencil-skirt). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification