本文へ移動
Threadline Patterns
日本語

丸襟のポプリンブラウス – 型紙一覧

丸襟のポプリンブラウスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。

サイズ
XS – 3XL
難易度
初級者向け
バージョン
1.0.0-published
更新日
2026-03-09
公開状況
公開済み

前後の製図

前面
背面

PDFファイルのダウンロード

「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ(50.8 mm)の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。

印刷確認用シートをダウンロード

寸法表

寸法の単位

すべての表でセンチメートルとインチを切り替えます

1. 身体寸法表

身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。

横にスクロール
サイズ バスト ウエスト ヒップ
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. 仕上がり寸法表

デザイン上のゆとりを含めた、完成した衣服の寸法です。

横にスクロール
サイズ 仕上がりバスト 仕上がり丈 裾周り 上腕周り
XS 90 cm 60 cm 96 cm 28 cm
S 96 cm 62 cm 102 cm 29.5 cm
M 102 cm 64 cm 108 cm 31 cm
L 108 cm 66 cm 114 cm 33 cm
XL 118 cm 68 cm 124 cm 36 cm
2XL 128 cm 70 cm 134 cm 39 cm
3XL 138 cm 72 cm 144 cm 42 cm

サイズ選択について

Select size corresponding to full chest/bust measurement. Compare bicep circumference for comfortable sleeve fit.

ゆとりについて

Tailored shirts incorporate +10 to +14 cm chest ease for relaxed everyday movement and layering.

生地と用具

Cotton poplin, Oxford cloth, linen, or chambray · None (0% stable woven)

  • Cotton poplin, Oxford cloth, linen, or chambray
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.61.751.31.4
L – XL1.92.11.51.65
2XL – 3XL2.22.41.81.95

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • 10 to 12 mm shirt buttons (8 to 10 count)
  • Lightweight fusible interfacing for collar and cuffs

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

裁断と型紙パーツ

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

10 mm (3/8 in) for collar stand seam.

  • Darted Front: Cut 1 Pair Bust darts
  • Back Bodice: Cut 1 on Fold Center back fold
  • Sleeve: Cut 1 Pair Short or long sleeve
  • Collar Leaf: Cut 4 Collar Halves, 2 Interfaced Rounded Peter Pan collar
  • Collar Stand: Cut 2 (1 Interfaced) Collar stand

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

縫製手順

1

Cut Pieces and Interface

Cut front bodice panels, back bodice on fold, sleeves, and rounded Peter Pan collar halves. Interface outer collar.

2

Bust Darts and Shoulders

Sew front bust darts, pressing fullness toward waistline. Join shoulder seams.

3

Attach Peter Pan Collar

Construct collar halves, attach along neckline, and enclose raw edge with neat bias strip facing.

4

Sleeves and Side Seams

Insert sleeves into armholes with right sides facing, easing cap curve. Sew side seams and sleeve underarms.

5

Button Bands and Hemming

Fold front button button bands, sew buttonholes and buttons, and stitch double-turn hem along bottom.

困ったときは

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

出典とライセンス

Threadline Open Design Studio (peter-pan-poplin-blouse). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

検証について

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

英語の原文ページお問い合わせ

関連する型紙