オーバーサイズのオックスフォードシャツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
デザイン上のゆとりを含めた、完成した衣服の寸法です。
Generously cut with 24 cm (9.4") ease for an effortless boyfriend fit. Size down if you prefer standard tailoring.
Oversized positive ease of +24 cm (+9.4") across chest and relaxed dropped shoulders.
Crisp light to midweight shirting wovens · None (0% stretch - stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.2 | 2.4 | 1.7 | 1.9 |
| L – XL | 2.5 | 2.7 | 1.9 | 2.1 |
| 2XL – 3XL | 2.8 | 3.1 | 2.2 | 2.4 |
1.5 cm (5/8 in) seam allowance; use flat-felled seams for durability.
0.6 cm (1/4 in) narrow curved hem.
1.0 cm (3/8 in) on collar and stand.
Interface collar, collar stand, front plackets, and outer cuffs.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Hem upper edge of Chest Pocket and topstitch Chest Pocket onto left front shirt. Fold box pleat in center back. Stitch shoulder seams sandwiching front and back bodice between outer and inner back yokes right sides together using the burrito method. Topstitch yoke seam and press seam allowances.
Stitch collar points, turn, and edge-stitch. Sandwich collar into collar stand pieces. Press.
Slash sleeve placket lines, attach placket strips, and form triangular tower topstitch.
Pin outer collar stand to shirt neckline right sides together and stitch. Fold inner stand seam under, press seam allowances, and edgestitch in the ditch.
Insert long sleeves into armholes right sides together. Stitch continuous flat-felled side seams right sides together. Pleat sleeve bottoms into cuffs, stitch, and press seam allowances.
Turn narrow double hem around curved hemline, press seam allowances, and stitch. Sew vertical buttonholes on front band and sew on buttons.
Not enough turn-of-cloth allowance.
Ensure undercollar is trimmed 2 mm smaller than upper collar before sewing.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio