Bust Darts and Cutting
Cut darted front panels, back bodice on fold, sleeves, and collar pieces from fluid woven fabric.
Soepele Franse viscoseblouse: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size corresponding to full chest/bust measurement. Compare bicep circumference for comfortable sleeve fit.
Tailored shirts incorporate +10 to +14 cm chest ease for relaxed everyday movement and layering.
Cotton poplin, Oxford cloth, linen, or chambray · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.7 | 1.85 | 1.4 | 1.55 |
| L – XL | 2 | 2.2 | 1.6 | 1.75 |
| 2XL – 3XL | 2.3 | 2.5 | 1.9 | 2.1 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
10 mm (3/8 in) for collar stand seam.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut darted front panels, back bodice on fold, sleeves, and collar pieces from fluid woven fabric.
Stitch bust darts on front bodice panels, pressing dart fullness downward.
Sew shoulder seams. Construct collar and stand, attach to neckline, and enclose seam neatly inside inner stand.
Set sleeves into armholes with right sides facing, easing sleeve cap into armscye.
Stitch side seams and sleeve underarm seams, turn narrow double hem along bottom edge, and press.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (french-fluid-rayon-blouse). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Overhemden en blouses · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesOverhemden en blouses · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesOverhemden en blouses · Beginner
Maten: XS to 3XL (Bust 80–132 cm / 31.5"–52.0") · Gepubliceerd
Bekijk patroon en instructies