Cut Pieces
Cut dress body panels on fold and self-fabric tie sash from lightweight drapey fabric.
Onderjurk met verlaagde taille: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on high bust and full bust measurement.
+6 to +10 cm bust ease; skirt panel flares generously over hips.
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.4 | 2.6 | 1.9 | 2.1 |
| L – XL | 2.8 | 3.05 | 2.3 | 2.5 |
| 2XL – 3XL | 3.2 | 3.5 | 2.7 | 2.95 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut dress body panels on fold and self-fabric tie sash from lightweight drapey fabric.
Join shoulder seams with right sides bias binding and finish low scoop neckline with narrow bias bias binding.
Sew side seams from underarm to hem, pressing seams open or finishing with French seams.
Construct narrow tie sash belt by folding right sides together, stitching, and turning right side out.
Turn and stitch delicate narrow double-turn hem along lower skirt sweep, then press thoroughly.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (dropped-waist-slip-dress). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jurken en rokken · Gevorderde beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJurken en rokken · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies